SMART CHARGING WITH PRE- AND POST-REPORT
The TB6000Pro's smart charging system with pre-and-post report abilities generates a report that compares the condition of a battery before and after it has been charged.
Save battery reports as photos to view them at any time.
TESTING & CHARGING IN ONE TOOL
Two functions, one tool. The TB6000Pro can charge 6V/12V lead-acid and 12V lithium batteries. What’s more, this battery tester can test a battery’s state of charge, state of health, CCA, and more using the Kelvin method. Supporting detailed charging tests and cranking tests for 12V Lead-Acid batteries, the TB6000Pro gives superior battery diagnostics via the mobile app.
Do more with the TB6000Pro. Complete more jobs in less time.
POWER OUR BATTERY, PROLONG ITS LIFE
Utilizing pulse-width modulation to break down the sulfates in the aging battery, the TB6000Pro can restore the battery resistance efficiently and prolong service life. The pre and post testing for a battery will show the improvement of battery's resistance after being charged.
MAINTAIN BATTERY WITH 9-STEP SMART CHARGING
TOPDON’s patented 9-step smart charging gives your lead-acid battery an optimized, maintained, and integrated charging process. When connected, not only will the TB6000Pro charge the battery, but it will desulfate and act a battery maintainer to truly repair your car battery. Moreover, the TB6000Pro specializes in offering a specialized smart charging mode for lithium batteries.
A RELIABLE CHARGING SOLUTION
TOPDON has a huge database of automotive batteries, which acts as an important source of data for the R&D Team to offer suitable charging experience for customers. If users consent to upload their charging data to the App, TOPDON can optimize the charging algorithm constantly and provide more effective solutions with real-life data.
CHARGE LIKE A PRO
In addition to a set 9-step smart charging mode, TB6000Pro also allows you to perform more customization on its routine. You can adjust the max voltage and current in lead-acid battery, lithium battery, and supply mode. Add multiple modes to the cycle and switch between them at any time. For professional technicians, the TB6000Pro supports expert mode to adjust more values within the 9 steps, such as current, voltage, pulse current and duration, and generates waveforms showing the charging status, including real-time voltage and current.
ONE CHARGER DOES IT ALL
The TOPDON TB6000Pro supports a wide selection of batteries ranging from 5Ah to 240Ah, compatible with all types of 6V & 12V lead-acid batteries, and 12V lithium batteries including LI, WET, GEL, MF, CAL, EFB, AGM. This widely compatible battery charger can expand your shop’s capabilities to get multiple battery types charged with only one tool.
TIMED AUTOMATIC CHARGING
Setting the charging time on the app is as easy as setting an alarm clock. The tool can charge and monitor the battery while you’re doing other things. This timed charging feature allows you to automatically charge at low-cost times based on energy rates, saving you money on your energy bills. For the extremely budget-conscious, the TB6000Pro offers a cumulative billing function that allows you to easily calculate electricity usage.
SMART SAFETY INSIDE AND OUT
Interior Design: With the TB6000Pro’s smart safety features, you’re protected against reverse polarities, sparks, short circuits, overheating, and over-voltage.
SMART SAFETY INSIDE AND OUT
Exterior Design: The TB6000Pro can be used in high temperatures and humid environments with its rugged ABS cover. It’s also waterproof and dirt-proof with IP65 grade protection rating.
More Product Info
Download >>-
Specification
- Input Voltage: 100-240V
- Output Current: 1-6A
- Output Voltage: 6-16V
- Charging Mode: 12V/6A (NORM/LI/SUPPLY), 12V/3A SMALL, 12V/1A REPAIR, 6V/3A NORM
- Applicable Batteries: 5-240Ah
- AC Cable Length: 2m, Input AWG18#
- Charging Method: 9-Step Smart Charging
- DC Cable Length: Positive AWG14#, 1.8m; Negative AWG14#, 1.8m
- Applicable Battery Type: LI, WET, GEL, MF, CAL, EFB, AGM
- Protection Rating: IP65/COLD/BOOST/REPLY/AGM
- Applicable Batteries: 20-2800Ah
- AC Cable Length: 1.8m, Input AWG18#
- Clamp Length: Positive AWG4#, 2.2m; Negative AWG4#, 2.2m
- Protection Rating: IP20 Fan cooled
-
Packing List
- 1 x TB6000Pro
- 1 x Battery Clamps
- 1 x Ring terminals
- 1 x User Manual
Video
FAQ
General
Will the TB6000Pro stop charging automatically after the battery is fully charged?
Will the TB6000Pro stop charging automatically after the battery is fully charged?
Yes. The TB6000Pro adopts 9-step smart charging. When the battery is fully charged, it will automatically stop charging without the risk of overcharging. If you still leave the battery connected, the charger will keep monitoring the battery status and will automatically start charging when the battery voltage falls below its targeted threshold.
Can the TB6000Pro charge multiple batteries simultaneously?
Can the TB6000Pro charge multiple batteries simultaneously?
Yes. Please connect these batteries in series or parallel before beginning the charging process. If you have questions about the connection, you can consult the battery manufacturer or contact us for help.
Is REPAIR mode applicable to all battery types?
Is REPAIR mode applicable to all battery types?
No, it can’t be used for lithium batteries. However, it is applicable to all types of lead-acid batteries.
Operation
Which charging settings should I use?
Which charging settings should I use?
Please select the charging mode according to the battery type and capacity. We recommend that the current value should not be greater than 20% of the battery capacity value. For example, for a 20Ah battery, we recommend that the TB6000Pro’s current is not greater than 4A.
Why can’t some batteries be used normally after repair?
Why can’t some batteries be used normally after repair?
If a battery cannot hold a charge, consult the battery manufacturer on whether the battery is completely damaged and if it can be repaired through a different method.
Why can’t some batteries be charged?
Why can’t some batteries be charged?
Generally, a 12V battery with a voltage lower than 8.5V is damaged and cannot be charged normally. If the battery is damaged or an Er4 error is reported, you can select the 12V Supply mode to recover battery charging.
